Thru-beam sensor ML29-2P/25/103/143
- Single-beam monitoring with extremely narrow sensor
- Integrated circuit
- Test
- Simple installation - Plug & Play
- Ideal for installation in door profiles or frames
- Dual-beam version master/slave for dual-beam protection of closing edges
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datablad utdrag: Tekniske data for ML29-2P/25/103/143
| Produktbeskrivelse |
|---|
| Single-beam miniature sensor, ideal for installing in frames or door profiles |
| General specifications | ||
|---|---|---|
| Effective detection range | 0 ... 5 m | |
| Threshold detection range | 7 m | |
| Light source | IRED | |
| Light type | modulated infrared light | |
| Opening angle | +/- 8 ° | |
| Optical face | lateral | |
| Ambient light limit | 40000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 880 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Function indicator | LED red in receiver : lights up when receiving the light beam | |
| Electrical specifications | ||
| Operating voltage | 11 ... 30 V DC | |
| No-load supply current | ≤ 35 mA per device | |
| Input | ||
| Test input | Test: emitter deactivation at 0 V | |
| Output | ||
| Switching type | light-on | |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 0.1 A | |
| Switching frequency | 50 Hz | |
| Response time | 10 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 61000-6-2, EN 61000-6-3 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -20 ... 75 °C (-4 ... 167 °F) | |
| Relative humidity | 90 % , noncondensing | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 4-pin plastic connector, 6.5 mm diameter | |
| Material | ||
| Housing | Transmitter: PMMA black / Receiver: red PMMA | |
| Optical face | Plastic pane | |
| Mass | 555 g | |
| Dimensions | ||
| Height | 85.2 mm | |
| Width | 11.6 mm | |
| Depth | 9.2 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: ML29-2P/25/103/143
The narrow miniature thru-beam sensors are a small and cost-effective solution, fitting in virtually any door frame. The ML29 and ML30 series offer fast, reliable detection at a distance of up to 8.5 m. The sensors are easy to mount on the profile, either using adhesive strips or a screw. A large opening angle ensures problem-free alignment. Several sensors can be mounted in a cross formation to offer multi-beam protection.
Datasheet: ML29-2P/25/103/143
| Datasheet | Filtype | Filstørrelse |
|---|---|---|
| 数据表 ML29-2P/25/103/143 | 200 KB | |
| Datasheet ML29-2P/25/103/143 | 516 KB | |
| Fiche de données ML29-2P/25/103/143 | 511 KB | |
| Datenblatt ML29-2P/25/103/143 | 513 KB | |
| Scheda tecnica ML29-2P/25/103/143 | 510 KB | |
| Hoja de datos ML29-2P/25/103/143 | 512 KB |
Documents: ML29-2P/25/103/143
| Brochures | Filtype | Filstørrelse |
|---|---|---|
| Product Information - TTA (Sensors for Doors, Gates, Elevators) - Branch overview / Produktinformation - TTA (Sensoren für den Tür-, Tor- und Aufzugsbau) - Branchenübersicht | 4008 KB | |
| Instruction leaflets | ||
| Instruction leaflet / Beipackzettel | 111 KB |
CAD+CAE: ML29-2P/25/103/143
| CAD | Filtype | Filstørrelse |
|---|---|---|
| 3-D model emitter / 3-D-Modell Sender | STP | 73 KB |
| CAD 3-D additional / CAD 3-D additional | STP | 73 KB |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: ML29-2P/25/103/143
| Declaration of Conformity | Filtype | Filstørrelse |
|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 229 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | 225 KB |
Relaterte produkter: ML29-2P/25/103/143
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.