Loop detector LC10-1-D 230 VAC
- Sensor system for vehicle detection
- Complete control interface for inductive loops laid beneath the surface
- Reliable detection with long service life
- Various operating modes available
- Boost function for increasing sensitivity
- Test function
- Version with 1 loop channel
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datablad utdrag: Tekniske data for LC10-1-D 230 VAC
| Produktbeskrivelse |
|---|
| Universal sensor system for detecting vehicles |
| General specifications | ||
|---|---|---|
| Marking | CE | |
| Operating mode | Pulsed and continuous signal | |
| Functional safety related parameters | ||
| MTTFd | 306 a | |
| Mission Time (TM) | 20 a | |
| Indicators/operating means | ||
| Control elements | DIP switch | |
| Switching state | LED | |
| Electrical specifications | ||
| Operating voltage | 230 V AC ( galvanically isolated from loop ) | |
| Ripple | -15 %/+10 % | |
| Power consumption | 1.6 VA | |
| Calibration time | 2 s | |
| Loop inductivity | 100 ... 1000 µH | |
| Loop frequency | 20 ... 120 kHz | |
| Input | ||
| Number of channels | 1 | |
| Output | ||
| Output type | relay | |
| Switching voltage | 250 V AC | |
| Switching current | 6 A | |
| Pulse length | period or 800 ms Pulse | |
| Response time | 100 ms | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP30 | |
| Connection | Plug socket ; 11-pin Terminal connection ≤ 1.5 mm2 | |
| Dimensions | ||
| Height | 75 mm | |
| Width | 37.5 mm | |
| Depth | 71 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280490 |
| ECLASS 12.0 | 27280490 |
| ECLASS 11.0 | 27280490 |
| ECLASS 10.0.1 | 27280490 |
| ECLASS 9.0 | 27280490 |
| ECLASS 8.0 | 27280490 |
| ECLASS 5.1 | 27281001 |
| ETIM 9.0 | EC002887 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC001442 |
| UNSPSC 12.1 | 46161510 |
Details: LC10-1-D 230 VAC
Together with the inductive loops laid beneath the surface, the loop detectors form a universal sensor system for detecting vehicles. Vehicles that enter the inductive loop change the resonant frequency. The microprocessor in the loop detector measures and analyzes this frequency change. The analysis is automatically and periodically adjusted to the respective loop, ensuring that any changes in the loop inductance caused by temperature, humidity, or component age are automatically compensated for.
Datasheet: LC10-1-D 230 VAC
| Datasheet | Filtype | Filstørrelse |
|---|---|---|
| Datasheet LC10-1-D 230 VAC | 519 KB | |
| Fiche de données LC10-1-D 230 VAC | 541 KB | |
| Datenblatt LC10-1-D 230 VAC | 513 KB | |
| Scheda tecnica LC10-1-D 230 VAC | 558 KB | |
| Hoja de datos LC10-1-D 230 VAC | 600 KB |
Documents: LC10-1-D 230 VAC
| Brochures | Filtype | Filstørrelse |
|---|---|---|
| Product Information - TTA (Sensors for Doors, Gates, Elevators) - Branch overview / Produktinformation - TTA (Sensoren für den Tür-, Tor- und Aufzugsbau) - Branchenübersicht | 4008 KB | |
| Manuals | ||
| Manual Laying loops for loop detector LC10-1 und LC10-2 | 1994 KB | |
| Handbuch Schleifenverlegung für Schleifendetektoren LC10-1 und LC10-2 | 2009 KB | |
| Instruction leaflets | ||
| Instruction leaflet / Beipackzettel | 307 KB |
CAD+CAE: LC10-1-D 230 VAC
| CAD | Filtype | Filstørrelse |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 263 KB |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: LC10-1-D 230 VAC
| Declaration of Conformity | Filtype | Filstørrelse |
|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 266 KB |
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.