Laser light sensor VLM350-F280-R4-1001
- Comparison of up to 32 height profiles
- Output of X/Z offset
- Intelligent exposure time control
- Laser class 1, eyesafe
- Data Matrix control codes for parameterization
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datablad utdrag: Tekniske data for VLM350-F280-R4-1001
| Produktbeskrivelse |
|---|
| Laser light sensor for profile matching; Comparison of up to 32 height profiles; Output of X/Z offset; Resolution: 752 x 480 pixel; Measuring range: X = 40 ... 160 mm, Z = 60 ... 350 mm; Scan rate: 10 s-1; 2 digital outputs; RS-485 interface |
| General specifications | ||
|---|---|---|
| Measurement range | X = 40 ... 160 mm ; Z = 60 ... 350 mm | |
| Light source | laser diode | |
| Light type | red laser + Integrated LED lightning red 650 nm | |
| Laser nominal ratings | ||
| Note | VISIBLE LASER RADIATION , DO NOT STARE INTO BEAM DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS |
|
| Laser class | 1 | |
| Wave length | Measuring laser: 660 nm | |
| Pulse length | Measuring laser: 0.5 ms | |
| Maximum optical power output | Measuring laser: 15 mW | |
| Laser monitoring | The safety system switches off the laser when the laser current is too high | |
| Scan rate | 10 s-1 | |
| Resolution | X>0.44 mm; Z>0.4 mm at 60 mm distanc X>1.1 mm; Z>1.1 mm at 200 mm distanc X>1.9 mm; Z>2.5 mm at 350 mm distanc |
|
| Functional safety related parameters | ||
| MTTFd | 20 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Diagnostics indicator | LED yellow / red | |
| Function indicator | Trigger: LED yellow ; object detected : LED red / green | |
| Control elements | 2 push-buttons | |
| Electrical specifications | ||
| Operating voltage | 24 V ± 20 % , PELV | |
| No-load supply current | max. 250 mA | |
| Power consumption | max. 6 W , Outputs without load | |
| Interface | ||
| Interface type | RS 485 interface | |
| Physical | Switchable terminal resistor | |
| Protocol | binary code | |
| Transfer rate | 38400 ... 230400 Bit/s | |
| Input | ||
| Input voltage | 24 V | |
| Number/Type | External triggering + 1 Input | |
| Switching threshold | low: < 2.5 V, high: > 8 V | |
| Output | ||
| Number/Type | 2 digital outputs | |
| Switching type | PNP | |
| Switching voltage | 24 V | |
| Switching current | 150 mA each output | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Noise immunity | EN 61000-6-2:2005 | |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Degree of protection | EN 60529 | |
| Shock and impact resistance | EN 60068-2-27:2009 | |
| Laser class | IEC 60825-1:2007 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, Type 1 enclosure | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Approvals | CE | |
| Ambient conditions | ||
| Operating temperature | -20 ... 45 °C (-4 ... 113 °F) , (noncondensing; prevent icing on the lens!) | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | 8-pin, M12 x 1 connector ( supply + RS485 + Inputs/Outputs ) ; can be rotated 90° ; Grounding : Grounding clip for PCV system | |
| Material | ||
| Housing | PC/ABS | |
| Optical face | Plastic pane | |
| Mass | approx. 125 g | |
| Tightening torque, fastening screws | max. 2 Nm | |
| Dimensions | ||
| Height | 85 mm | |
| Width | 38 mm | |
| Depth | 55 mm | |
| General information | ||
| Note | Security Instructions: |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: VLM350-F280-R4-1001
The SmartRunner Matcher compares current height profiles with a previously taught-in height profile. The Matcher is based on innovative SmartRunner technology and combines the light section method for detecting height profiles with a 2-D vision sensor. The light section method involves projecting a laser line onto an object. This is then detected by a camera at a specific angle. A height profile is then created using the triangulation principle. This innovative laser technology provides reliable measurements on different surfaces.
Datasheet: VLM350-F280-R4-1001
| Datasheet | Filtype | Filstørrelse |
|---|---|---|
| Datasheet VLM350-F280-R4-1001 | 1824 KB | |
| Datenblatt VLM350-F280-R4-1001 | 1811 KB |
Documents: VLM350-F280-R4-1001
CAD+CAE: VLM350-F280-R4-1001
| CAD | Filtype | Filstørrelse |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 8066 KB |
| CAD Portal / CAD Portal | LINK | --- |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | EDZ | 59 KB |
Approvals+Certificates: VLM350-F280-R4-1001
| Declaration of Conformity | Filtype | Filstørrelse |
|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 39 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | 224 KB |
Software: VLM350-F280-R4-1001
| Software Tools | Filtype | Filstørrelse |
|---|---|---|
| Software Vision Configurator / Software Vision Configurator | ZIP | 31588 KB |
Relaterte produkter: VLM350-F280-R4-1001
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Discover the SmartRunner laser profile sensors equipped with a unique combination of light section technology and a 2-D vision sensor with integrated LEDs …
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.